Thermomat

Patient Warming System

The JMW Medical Ltd Thermomat range of products offer an Electrically Safe system of Patient Warming. The key features of the Thermomat range are:

Versatile, Easy to Use and Store

Electrically Safe Pads

Padded for extra comfort

X-Ray Translucent

CE marked for use in Europe

The Thermomat Pads are operated at a maximum of 24 volts and isolated from earth marking them Electrically Safe even when the pad is cut or drilled through.

Each pad contains 8 heat sensors split between two circuits. With both visual and audible alarms operating if there is a difference greater than 3°C between either circuit. This provides a fail safe operation.

Compatible, The Thermomat patient warming system will not cause any interence with ECG monitors and can be used in conjuction with Diathermy.

A single dial on the Thermomat control unit allows for ease of use in setting the target temperature between 33°C and 40°C. A push button is used to confirm the selected temperature.

The Thermomat Pads are also easy to store, light to carry and easy to clean.

The Thermomat units come with Excellent After Sales Support. A full service manual is supplied which is baced up by JMW Medical Ltd Technical Department.

Your JMW Controller

The T5002 has it's temperature set by means of a switch and confirmed by pressing a button. A green LED indicates the unit is on and a flashing amber LED indicates the unit has reached the required temperature. A red LED and an audible alarm indicates a fault or that the pad has been disconnected.

Nine LED's are provided on the rear panel for a self test facility and fault diagnosis.

The T5002 also has a LED display showing the temperature of the pad.

Choose your JMW Pad

You have a choice of two pads.

HPA1400 Adult Pad	1400 x 530 mm
HPP900 Pediatric Pad	900 x 530 mm